1.25 inches equals 3.175 cm or 31.75 mm. That is about the width of a Kennedy half dollar and a large coat button.
This guide gives the exact conversions, a ruler view, 12 everyday items, and a no-ruler method. Quick answers sit at the end.
How Long Is 1.25 Inches? Unit Conversion
1.25 Inches to CM
- 1.25 inches is equal to 3.175 cm
- Formula: centimeters = inches × 2.54
- Worked example: A 1.25-inch-wide button measures 1.25 × 2.54 = 3.175 cm across.
1.25 Inches to MM
- 1.25 inches is equal to 31.75 mm
- Formula: millimeters = inches × 25.4
- Worked example: A 1.25-inch screw is 1.25 × 25.4 = 31.75 mm long.
1.25 Inches to Meters
- 1.25 inches is equal to 0.03175 m
- Formula: meters = inches × 0.0254
- Worked example: A 1.25-inch gap is 1.25 × 0.0254 = 0.03175 m, or about 3.2 cm.
1.25 Inches to Feet
- 1.25 inches is equal to 0.1042 ft
- Formula: feet = inches ÷ 12
- Worked example: A 1.25-inch-wide strip is 1.25 ÷ 12 = 0.1042 ft wide.
1.25 Inches to Yards
- 1.25 inches is equal to 0.0347 yd
- Formula: yards = inches ÷ 36
- Worked example: A 1.25-inch ribbon is 1.25 ÷ 36 = 0.0347 yd.
1.25 Inches to Points
- 1.25 inches is equal to 90 pt
- Formula: points = inches × 72
- Worked example: A 1.25-inch-tall text block is 1.25 × 72 = 90 pt high.
1.25 Inches to Picas
- 1.25 inches is equal to 7.5 pc
- Formula: picas = inches × 6
- Worked example: A 1.25-inch column gap is 1.25 × 6 = 7.5 pc wide.
1.25 Inches to Pixels (96 PPI)
- 1.25 inches is equal to 120 px at 96 PPI
- Formula: pixels = inches × 96
- Worked example: A 1.25-inch-wide element on a 96 PPI screen is 1.25 × 96 = 120 px wide.
1.25 Inches as a Fraction
- 1.25 inches is equal to 1 1/4 in (5/4 in)
- Formula: fraction = whole number + decimal as a fraction (0.25 = 1/4)
- Worked example: A 1.25-inch bolt is 1 + 1/4 = 1 1/4 in long.
Must Visit: How Long Is 1 Inch?
What Does 1.25 Inches Look Like?
On a ruler, 1.25 inches sits one full inch plus a quarter inch. Look for the longer line four sixteenths past the 1-inch mark.
On the metric side, it lands just under the 3.2 cm line. A quick 1.25 inches comparison: it is about 0.3 inch wider than a US quarter (0.955 in).
How Big Is 1.25 Inches? 12 Common Things That Are 1.25 Inches Long

Kennedy Half Dollar
The Kennedy half dollar measures 1.205 inches across. It is the closest US coin to 1.25 inches. The US Mint has made it since 1964.
Classic 2×4 Lego Brick
A standard 2×4 Lego brick is about 31.8 mm long. That rounds to 1.25 inches. Grab one for a quick, steady 1.25 inch guide.
1.25-Inch Button Badge
1.25 inches (32 mm) is a standard pin-back button size. Event pins, campaign buttons, and fan badges often use it.
Large Coat Button
Many peacoat and trench coat buttons run about 1.25 inches wide. Smaller shirt buttons fall well under one inch.
Plastic Bottle Cap
A typical soda or water bottle cap is about 1.2 to 1.25 inches wide. It is a handy tool when no ruler is nearby.
USB Flash Drive Width
Some wider flash drive casings measure about 1.25 inches across. Slim drives are narrower, so check yours first.
Car Key Fob Width
Bulky multi-button key fobs often reach about 1.25 inches wide. Sizes differ by brand and model.
1¼-Inch Wood Screw
A 1¼-inch screw is 1.25 inches long. Drywall and general-purpose screws are often sold in this length. It is one of the most useful hardware references.
Medium Binder Clip
A medium binder clip is about 32 mm, or 1.25 inches, wide. Small clips are narrower and large ones are wider.
Sink Drain Tailpiece
A bathroom sink tailpiece is the pipe under the drain. Its nominal size is 1¼ inches. Kitchen sinks usually use 1½ inches.
Small Padlock Shackle Opening
Some compact padlocks have a shackle opening near 1.25 inches. It is a rough guide, so measure before you rely on it.
Standard Paper Clip
A standard paper clip is about 1.25 to 1.3 inches long. It is a light, handy size reference for any desk.
Must Visit: How Long Is 2.75 Inches?
How to Measure 1.25 Inches Without a Ruler
- Use a half dollar. It measures 1.205 inches. Add a tiny gap for the rest.
- Use a 2×4 Lego brick. Its long side is about 1.25 inches.
- Use a credit card. The short side is 2.125 inches, so 1.25 inches is about three fifths of it.
Why Understanding 1.25 Inches Matters
1.25 inches shows up in hardware, crafts, and design. Screws, pipes, and buttons all use it.
Print and screen work uses 90 pt or 120 px. Online listings also show sizes in inches.
For scale, One Inch is 25.4 mm. Two Inches is 50.8 mm. So 1.25 inches sits closer to one inch than to two.
Is 1.25 Inches Big or Small?
It depends on context. 1.25 inches is tiny for furniture but large for a button, a screw, or a coin.
One Inch (25.4 mm) is close to a US dollar coin at 1.043 inches. 1.25 inches (31.75 mm) matches a 1¼-inch fender washer. 1.5 inches (38.1 mm) is about the size of a poker chip. These 1.25 inches things show how small steps change the look of an object.
Must Visit: How Long Is 2.4 Inches?
FAQs
What is 1.25 inches long?
1.25 inches is 1 1/4 inches, or 3.175 cm.
What objects are 1.25 inches?
A Kennedy half dollar, a 2×4 Lego brick, and a button badge come close.
How tall is 1.25 inches with comparison?
It is about 3.2 cm tall, roughly 0.3 inch taller than a US quarter.
What does 1.25 inches look like?
It looks like a large coat button or a half dollar coin.
What does 1.25 equal in inches?
1.25 equals 1.25 inches, which is also 1 1/4 inches.
Is 1.25 inches the same as 1 1/4 inches?
Yes, 1.25 inches and 1 1/4 inches are the same length.
What does 1.25 equal to?
1.25 equals 5/4, 1 1/4, or 125 percent.
What is 1.25 equivalent to?
1.25 inches is equivalent to 3.175 cm or 31.75 mm.

I am the admin and author of Measur Cup, researching, verifying, and simplifying weight, length, and unit conversions to provide accurate, easy-to-understand measurement guides for everyday use.






